How long can a 3D printed fixed-wing drone fly?
A well-built 3D printed fixed-wing drone can fly for an hour or more on one battery, several times longer than a quadcopter of the same weight. Here is why, what flight time to expect for each size, and how to get the most out of yours.
Why a wing flies so much longer than a quadcopter
A quadcopter holds its full weight up with its propellers all the time, so it typically flies 20–35 minutes. A fixed wing lets the wing make the lift: the motor only has to push the drone through the air. In cruise it uses about a quarter to a third of the power, so the same battery lasts three to four times as long.
Expected flight time by size
| Drone | Type | Take-off weight | Cruise | Flight time* |
|---|---|---|---|---|
| Cheel 1200 | Flying wing | ≈ 1.5 kg | 58 km/h | ≈ 95 min |
| Koonj 1650 | Twin-boom cruiser | ≈ 2.1 kg | - | ≈ 110 min |
| Cheel 1800 | Flying wing + gimbal | ≈ 4.1–4.6 kg | 65 km/h | ≈ 63–90 min |
| Cheel 1800 VTOL | VTOL quad-plane | ≈ 5.9 kg | 68 km/h | ≈ 55 min |
| Hudhud VTOL | VTOL quad-plane | ≈ 8.1 kg | 19–20 m/s | ≈ 40 min |
*Calculated with the suggested Li-ion packs, in calm air. Wind, climbing and payload all reduce the time.
At 60 km/h, 90 minutes of flight is about 90 km of range: enough for long mapping lines or long-range FPV, within the rules of your country.
The 5 things that set flight time
- Weight. Every 100 g counts. Print shells in lightweight PLA (see best filament for 3D printed drones) and avoid extra infill.
- Battery type. Li-ion packs (such as 21700 cells) store about 50–70 % more energy per kilogram than LiPo. For slow, long cruising they are the best choice.
- Motor and propeller. A low-KV motor with a large, slow propeller is more efficient in cruise than a small fast one.
- Cruise speed. Fly near the best-endurance speed. Flying faster costs more power than it gains distance.
- Clean surfaces. Taped seams, closed gaps and a smooth nose reduce drag on a printed airframe.
Fixed wing or VTOL?
A VTOL drone takes off and lands vertically, so it needs no runway or launcher and lands without hitting the ground with its belly. The price is weight: four lift motors, booms and a second battery. Expect roughly 30–40 % less flight time than the same wing without VTOL. If you have open space for hand or bungee launch, the plain wing flies longest; if you work from small sites, the VTOL is worth it.
Check your own numbers
Enter your battery, weight and motor in the free flight time calculator, and balance the drone with the CG calculator before the first flight. Then see all our 3D printed drones; each one comes with a free assembly manual you can read before you buy.
Keep designing
Design Lab
Type in your own plane and get a scored analysis report: CG and neutral point, tail size, stall, L/D, flight time and wing strength, in 3D, with a PDF.
Open tool →Wing STL generator
Type in your wing and download print-ready STL sections with carbon tube channels, printed ribs, ailerons and a servo pocket.
Open tool →CG calculator
Balance point, neutral point and static margin for any RC plane, with a 3-view drawing and a battery-position helper.
Open tool →Flight time calculator
Endurance and range from weight, props and battery, with hover and cruise power.
Open tool →Wing loading calculator
Wing loading, stall and landing speed, and whether your weight is normal for your build.
Open tool →Battery pack calculator
Voltage, capacity, energy, weight and safe current for any S and P pack.
Open tool →