3D printed dronesVTOL drones, mapping drones and long-range FPV wings you print at home
Every LayerWings drone is designed to be 3D printed on a normal desktop printer and built with carbon tubes and standard RC electronics. Pick a VTOL drone that takes off straight up with no runway, a mapping drone that carries a 1 kg gimbal, or a light flying wing for long-range FPV. You get print-ready STL files and a step-by-step assembly manual you can read for free before you buy.

Cheel 1800 VTOL

Cheel 1800

Cheel 1200 VTOL

Cheel 1200

Hudhud VTOL

Shaheen 1200

Koonj 1650

Chakor 1300
Which 3D printed drone fits your job?
Flight times are calculated with the suggested Li-ion packs, in calm air.
| Drone | Span | Type | Take-off | Payload | Flight time | Best for |
|---|---|---|---|---|---|---|
| Cheel 1800 VTOL | 1800 mm | VTOL quad-plane (4 + 1) | Vertical | Gimbal ≤ 1 kg | ≈ 55 min | Mapping & survey, no runway |
| Cheel 1800 | 1800 mm | Flying wing | Hand / bungee | Gimbal ≤ 1 kg | ≈ 60–90 min | Long mapping flights |
| Cheel 1200 VTOL | 1200 mm | VTOL quad-plane (4 + 1) | Vertical | FPV / small camera | ≈ 45 min | VTOL on a budget |
| Cheel 1200 | 1200 mm | Flying wing | Hand launch | FPV camera | ≈ 95 min | Long-range FPV |
| Hudhud VTOL | 1860 mm | VTOL quad-plane | Vertical | 1.4 kg bay | ≈ 40 min | Mapping, light delivery |
| Shaheen 1200 | 1200 mm | Tail-sitter VTOL | Vertical (stands on its tail) | FPV / small camera | ≈ 98 min | VTOL without booms, long flights |
| Koonj 1650 | 1650 mm | Twin-boom cruiser | Hand launch | FPV / mapping camera | ≈ 110 min | Long-range FPV & mapping |
| Chakor 1300 | 1300 mm | Compact cruiser | Hand launch | FPV camera | - | Learning, first build (free) |
Why 3D print a drone?
A 3D printed airframe costs a fraction of a moulded composite UAV, and every part can be printed again in a few hours after a crash. You choose the electronics, the camera and the flight controller, so the drone fits your mission and your budget instead of the other way round. Printed in light-weight PLA with carbon spars, a well-designed printed wing flies just as efficiently as a foam or fibreglass one.
VTOL drone or hand-launched wing?
A VTOL drone (vertical take-off and landing) adds four lift motors to the wing. It takes off and lands like a multicopter, so you can fly from a small yard, a rooftop or a field with crops, and you never need a launcher or a belly landing. The extra motors and booms cost weight and drag, so a VTOL flies roughly 30–40 % shorter than the same wing without the kit. If you have open space, the hand- or bungee-launched wing flies longer for the same battery.
What you need to build one
- A printer with a 256 mm bed (Bambu Lab A1, P1S, P1P, X1C or similar) and about 1 kg of LW-PLA or Bambu PLA Aero. VTOL kits also use some PETG and TPU.
- Carbon tubes and rods for the spars, booms and pins. Exact lengths are in each manual.
- Electronics: pusher motor and ESC, two elevon servos, a Li-ion battery pack, and a flight controller (we suggest ArduPilot on a Pixhawk or Matek H743 class board). VTOL drones add four lift motors and ESCs.
- Glue and tools: CA glue, epoxy, a soldering iron for heat-set inserts. See the VTOL build guide.
Not sure about the balance point or flight time of your own design? Use our free CG calculator and flight time calculator.
3D printed drone questions
Can you 3D print a drone that really flies?
Yes. Every LayerWings drone is printed in light-weight PLA (LW-PLA or Bambu PLA Aero) with carbon tubes inside for strength. The printed shell is thin and stiff, the carbon carries the loads, and the result weighs about the same as a foam or composite airframe of the same size.
What printer do I need for a 3D printed drone?
A printer with a 256 mm bed, such as a Bambu Lab A1, P1S, P1P or X1C. Every part is split to fit and comes already rotated and centred. The Bambu A1 mini (180 mm) is too small.
What is a VTOL drone?
VTOL means vertical take-off and landing. Our VTOL drones are quad-planes: four lift motors raise the plane straight up like a multicopter, then a pusher motor flies it forward on the wing, which is far more efficient. No runway or launcher is needed.
Which 3D printed drone is best for mapping?
The Cheel 1800 carries a zoom or day/night gimbal up to 1 kg for about an hour or more. Choose the Cheel 1800 VTOL if you have no open field for hand or bungee launch and belly landing.
What do I get when I buy?
Print-ready STL files for every part, a print guide, the parts in assembly position, a step-by-step assembly manual with a 3D picture for every step, drawings and the aerodynamic report. The assembly manual is free to read on each drone's page before you buy.
Do you sell finished drones?
No, we sell the digital STL files. You print the parts at home, add carbon tubes and your own electronics (motors, ESC, servos, flight controller such as ArduPilot) and build it with our manual.