LayerWings Sign in

3D printed drones · VTOL · RC planesDesign it.
Balance it.
Fly far.

3D printed drones and RC planes you can print at home: VTOL mapping drones, flying wings and long-range FPV planes, with STL files ready for Bambu Lab printers and a free step-by-step manual. Plus free calculators for any airframe: CG for every layout, wing loading, flight time and battery packs.

Any airframe material8 aircraft layoutsEvery result free
Koonj 1650 3D-printed FPV plane, studio render
How it works

From file to first flight

Print

Get the STL files and slicer profiles in your account email. Every part is checked for a 256 × 256 mm Bambu Lab bed; wings print standing up in LW-PLA, with the ribs printed inside.

Build

Glue the sections together, slide in two carbon tubes per wing, plug the wings onto two joiners. No rib kits to cut, no jigs.

Fly

Set the CG from the drawing, load the ArduPilot channel map from the wiring diagram, hand-launch and fly.

The LayerWings way

Built simple. Documented fully.

Shells + two tubes

No rib structure to fight with. Each wing section is a printed shell with two tube channels; the carbon tubes carry the load.

Plug-in side wings

Airfoil root stubs on the body, two carbon joiners and one M4 bolt per side. The wings come off for transport in seconds.

Camera-first nose

A fixed DJI O3 sits flush in the egg-shaped nose, with cooling vents and three magnetic hatches for camera, battery and autopilot.

Everything shown

X-ray and bay views, wiring diagram, CG drawings, wall thicknesses, carbon tube list and aerodynamic charts for every plane.

Launch list

Be first to fly it

Get one email when a new plane is ready to download, plus new designs and tool updates. No spam.